• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 49 subscribers
  • Views 516 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA180: input bias current spec

ajayt
Genius 9555 points

Part Number: OPA180

Hi I am not sure how to read and use the min and max of the input bias current,  I can see for the typical curves how the bias current trends.

min is given as 18nA  and max +-6nA.  Can you explain how you would design with these specs in mind?

  • 0
    TI__Expert 3175 points

    Hi ajayt,

    This is a typo. The max value of the input bias current is +/- 18 nA and the max value of the input offset current is +/- 6 nA across the specified temperature ranges. There is no specified minimum current for either spec.