Require Linear Equalizer

shivakant dwivedi

Intellectual 960 points

Other Parts Discussed in Thread: DS280BR820

Hi Team,

I require Linear equalizer which can support speed up to 64Gbps NRZ or 32 Giga Buad per sec for PAM4.

Please suggest any P/N.

If this is not available then up to what speed TI will support? Please also send P/N or link if any.

over 6 years ago

0 Nasser Mohammadi over 6 years ago

TI__Guru* 93570 points

Greetings,

The highest data rate linear redriver at the moment is DS280BR820. Here is a link to this device data sheet:

http://www.ti.com/lit/ds/symlink/ds280br820.pdf

Regards,, nasser

0 shivakant dwivedi over 6 years ago in reply to Nasser Mohammadi

Intellectual 960 points

Hi Nasser,

I just want to know the gain characteristic of DS280BR820 @ 20 GHz.

I want to use it for 32 G baud PAM4 application which has Band width 16 GHz. In data sheet characteristics are given for 14 GHz.

What will be disadvantages or compromise which i will face while using it for PAM4 serdes Lane signalling.

It would be better if you provide any simulation file for DS280BR820 like S2P.

0 Nasser Mohammadi over 6 years ago in reply to shivakant dwivedi

TI__Guru* 93570 points

Greetings,

Please register at TI.COM using your company email address. Then follow the link below to request access to the DS280BR820 design documents including IBIS-AMI files.

www.ti.com/.../swlicexportcontrol.tsp

Regards,, Nasser

0 shivakant dwivedi over 6 years ago in reply to Nasser Mohammadi

Intellectual 960 points

Hi Nasser,

I have put the access request.It will take some time to response from TI.

Mean while can you tell me its(DS280BR820) response (Gain/insertion loss) for 20 GHz frequency band.

0 Nasser Mohammadi over 6 years ago in reply to shivakant dwivedi

TI__Guru* 93570 points

Hi Shivakant,

It is best to provide you with IBIS-AMI access for DS280BR820 so you can run a simulation in your media environment. Please use your company email address and send me email at nasser.mohammadi@ti.com. Please provide some background related to your application as well.

Regards ,,, Nasser

0 shivakant dwivedi over 6 years ago in reply to Nasser Mohammadi

Intellectual 960 points

Hi Nasser,

I want to know how much max Equalization we can do with DS280BR820 in dB.

Also how much broad band gain in dB we can provide through this IC?

0 Nasser Mohammadi over 6 years ago in reply to shivakant dwivedi

TI__Guru* 93570 points

Hi Shivakant,

There is about 25dB gain - relative to 20MHz - with the highest EQ settings.

Please note performance of DS280BR820 in PAM-4 application highly depends on the channel characteristics, PAM4--4 receiver capability, and device placement. So it is highly recommend to run IBIS-AMI modeling to make sure your receiver is getting adequate eye opening.

Regards,, Nasser

Amplifiers

Amplifiers forum

Require Linear Equalizer