OPA4342: Impulse noise test

Sadanori Kato

Part Number: OPA4342

Hi,

The impulse noise test was perfromed with the board which multiple OPA4342s are mounted. So, could you please review the measurement result and give me your comments?
I would share the detailed information via a private message with you if you can accept my friendship request.

Best regards,
Kato

over 5 years ago

0 Former Member over 5 years ago

Hello Kato-san,

Please feel free to send me a friendship request and the material you would like reviewed. If you have any comments about desired performance or such, that would also be helpful.

Regards,
Daniel

0 Sadanori Kato over 5 years ago in reply to Former Member

Guru 36540 points

Hi Daniel-san,

Thank you for the approval.

I just sent the detailed information via a private message to you. So, please check it.

Best regards,
Kato

0 Former Member over 5 years ago in reply to Sadanori Kato

Hello Kato-san,

Thank you for sending the private message. I will review the content and get back to you shortly.

Since we will message privately, I am going to mark this thread as resolved for now. However, please feel free to return here and make a new post if you have further questions or comments to share on the public forum.

Regards,
Daniel

0 Sadanori Kato over 5 years ago in reply to Former Member

Guru 36540 points

Hi Daniel-san,

Thank you for your support.

I understand.

Best regards,
Kato

Amplifiers

Amplifiers forum

OPA4342: Impulse noise test