• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 318 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PSPICE-FOR-TI: PDN and SI simulation

Vinicius da Silva1
Prodigy 180 points
Part Number: PSPICE-FOR-TI


Hello

I would like to know if there is any way to simulate power delivery network (PDN) and/or signal integrity (SI) on Pspice for TI or even on TINA.

Regards,

Vinicius

  • 0
    TI__Mastermind 37790 points

    Vinicius,

    PSpice (and TINA) is general purpose circuit simulator, there is no built-in support for power integrity simulation. SI simulation is supported indirectly by converting IBIS models to circuit networks. The conversion function is available in the commercial version of Cadence SPB. You may need to look at that or other specialized solutions.

    Thanks,
    JC