ISO121: Power Supply ISO121BG

MASSIMO FIORI

Part Number: ISO121
Other Parts Discussed in Thread: ISO224

Good morning, I don't find information about power dissipation of ISO121BG in datasheet , could you help me ? I asked it because I don't know how select tantalium capacitor for power supply +/- 15Vdc.

So if you want suggest me a commercial model of tantalium capacitor I'll be glad.

Thank for your support

over 4 years ago

0 Tom Hendrick over 4 years ago

TI__Guru**** 181831 points

Hi Massimo,

Welcome to our e2e forum! Look at the quiesent current draw on page 2 of the datasheet. At 15V supply you will be looking at 60-75mW. You should be able to find 1uF 25V capacitors at your favorite distributor (or try DigiKey, Mouser, etc.).

0 Alexander Smith over 4 years ago

TI__Guru 55632 points

Hi Massimo,

I found this thread that should help: https://e2e.ti.com/support/amplifiers/f/14/t/519714?ISO-121-BG-Iso-Amp

If your application allows for a smaller creepage/clearance you may want to consider the ISO224 which is a newer device with a wide +/-12V input range.

0 MASSIMO FIORI over 4 years ago in reply to Tom Hendrick

Prodigy 40 points

Thank you for your collaboration

Massimo

0 MASSIMO FIORI over 4 years ago in reply to Alexander Smith

Prodigy 40 points

Thank you for your idea , unfortunately I have design in production phase. But your idea can be evaluate for a new design,

Thank you for your support

Massimo

0 kai klaas69 over 4 years ago

Guru 140200 points

Ciao Massimo,

when it comes to high temperature applications and using Tantal caps wouldn't be a good idea because of the very limited life time of Tantals at high temperatures, I take a 1µF/35V/X7R/0805 cap instead of the 1µF/35V tantal. You can even simulate the finite ESR of the Tantal by putting a small resistance of 0.22R...1R (0805) in series to the X7R cap :-)

Kai

0 Alexander Smith over 4 years ago in reply to kai klaas69

TI__Guru 55632 points

Hi Massimo,

May I contact you offline to discuss your project and our offerings?

0 MASSIMO FIORI over 4 years ago in reply to Alexander Smith

Prodigy 40 points

Thank you for your support but in this moment I prefer to go on with ISO121BG. I promise you to valuate your idea . Send me an email with your reference and If I need an help I promise you to contact also only for listen your opinion about the project.

Amplifiers

Amplifiers forum

ISO121: Power Supply ISO121BG