Hi,
I have ask OPA1679 question in below link on E2E.
My customer is asking if they use OPA1679 VCC is +/- 12V, the input source need any change? Need change to GND?
Thanks!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I have ask OPA1679 question in below link on E2E.
My customer is asking if they use OPA1679 VCC is +/- 12V, the input source need any change? Need change to GND?
Thanks!
Jeff,
Yes if running off of split supply +/-12V, the common mode voltage should be at mid supply or ground. I have updated the TINA simulation below to reflect this.
Jeff,
Below is the schematic. You can install TINA Ti for free in the link below as well.