TAS2557: Need HDI process during layout?

Len Hsu2

Intellectual 2440 points

Part Number: TAS2557

Hi team,

I have a quick question about layout process.

My customer design in TAS2557 and they are not sure if they need to do HDI during layout?

over 2 years ago

+1 Ivan Salazar over 2 years ago

TI__Guru* 95455 points

Hi Len,

It would depend on PCB factory capabilities, whether you can route internal signal pins out using different layers or have to route them between the ball pins.

Best regards,
-Ivan Salazar
Applications Engineer

Audio

Audio forum

TAS2557: Need HDI process during layout?