LM48560TLEVAL: Input/output values

Hi Julie,

• If I put the board in single ended mode as per the datasheet, will the output still be differential?
  • Yes, input can be used as single-ended but the output is always a BTL connection
• What are the min and max Vpp values at the audio inputs?
  • Electrical spec is -0.3V to VDD+0.3V 
  • Unfortunately there is no input common-mode voltage spec for this device; I would expect input to start clipping at ~1V below VDD, although output clipping should consider the gain of the amplifier as well

Best regards,
-Ivan Salazar
Applications Engineer