TPA2011D1: body size questions

Patty Chuang

Part Number: TPA2011D1

Hi Team,

The body size shows in datasheet for TPA2011D1 is 1.6mm*1.21mm

and the package information page size is not aligned as well. Could you please let us know what's the correct dimension information?

Thank you!

Thanks!

Patty Chuang

over 1 year ago

0 Daveon Douglas over 1 year ago

TI__Genius 15060 points

Hi ,

Please wait 24 hours for our speaker expert to comment. Thank you for your patience.

Regards,

0 Ivan Salazar over 1 year ago

TI__Guru* 99635 points

Hi Patty,

We're verifying this information, please allow a few more days while we confirm the correct value to display.
In the meantime, I would suggest to keep using the values from the package information at the last pages of the data sheet.

Best regards,
-Ivan Salazar
Applications Engineer

0 Patty Chuang over 1 year ago

TI__Intellectual 1155 points

Hi Team,

0 Patty Chuang over 1 year ago in reply to Ivan Salazar

TI__Intellectual 1155 points

Hi Ivan,

May I know when will the feedback be available? Thank you!

0 Ivan Salazar over 1 year ago in reply to Patty Chuang

TI__Guru* 99635 points

Hi Patty,

After checking this information we have the below comments:

Information from data sheet section 6 is correct. Please notice this are Typ values.
Information from data sheet page 29 is correct. Please notice this are Max and Min values, not Typ.
There is a typo in the table from data sheet front page it should be 1.16x1.21 instead.
Summary of the size (dimensions in mm):
- Min
  
  Typ
  
  Max
  
  X-dim
  
  1.184
  
  1.214
  
  1.244
  
  Y-dim
  
  1.130
  
  1.160
  
  1.190

Best regards,
-Ivan Salazar
Applications Engineer

Audio

Audio forum

TPA2011D1: body size questions

	Min	Typ	Max
X-dim	1.184	1.214	1.244
Y-dim	1.130	1.160	1.190