• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 304 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS3204 Mute-Pin. How to activate as Mute?

Frank Miketta55123
Prodigy 120 points
Other Parts Discussed in Thread: TAS3204

Hello,

how can i use the TAS3204 Mute-Pin. In the Datasheet i have found only this information:

Mute and power down functions have to be programmed in the EEPROM boot code. These are

general-purpose input pins and can be programmed for functions other than mute and power down.

Kind regards

Frank

  • 0
    TI__Expert 3215 points

     

    Frank,

    This Mute pin can be used as GP input pin, but you need to program the M8051 code, it's not accessible directly by DSP code.  On other TAS3x chips, there's an I2C command associated with this pin, but this is not implemented for TAS3204.

    Regards,

    Susan