Other Parts Discussed in Thread: TAS5342
I'm using the TAS5342A in an amplifier design, and am designing a heatsink to connect to the top exposed pad with thermal grease in between. In looking for the proper standoff height for the heatsink, the datasheet for the part (TAS5342A 100-W Stereo Digital Amplifier Power Stage datasheet (Rev. A)) on the Mechanical Information page it shows what looks to be a total height of 1.1mm +-0.1mm, but in the EVK user guide for the TAS5342 the heatsink specification (page 41) appears to show a standoff height of 1.02mm +-0.01mm. Could you please tell me what the correct standoff height should be for a heatsink for this part? Thank you.