• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 331 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Looking to implement AGC on TAS3204 using DRC

Jeff Kalis
Prodigy 110 points
Other Parts Discussed in Thread: TAS3204

I'm working on a project based on the TAS3204 DAP using Surepath Studio. I need an AGC function to boost low level signals using a relatively long decay time and cut high level signals with a fast attack time. Can this be implemented using DRC? Is there already an AGC component for the TAS3204? If yes, where can I find it? Thanks.

  • 0
    TI__Expert 3215 points

    Jeff,

    We have a DRC with a three-region gain curve, but they share the same set of decay/attach speed.  You could play with it to see whether it can fit your need.  We were working on an automatic Volume control, which would be more like AGC, but it's not at the official release stage yet.

    Susan