I find no information in the TAS3208 data sheet on the possible settings of the A-MUX of the DAC.
How is it possible to route the DACOUT1 to the LineOut of TAS3208EVM-LC?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I think that LineOut signals are the pass through signal of LineIn( which ever one of the ten sources, without any processing), you won't be able to route DAC signal to LineOut. I am not 100% sure though, since I've never worked on this specific chip, but TAS3308 Lineout is the pass through of LineIn.