Hi LPA team,
My customer is asking if the start-up of this IC.
Is it fine to hold the MS pin as low when booting the IC?
The datasheet indicates below.
Thanks,
Luke
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi LPA team,
My customer is asking if the start-up of this IC.
Is it fine to hold the MS pin as low when booting the IC?
The datasheet indicates below.
Thanks,
Luke
Hey Luke,
According to the datasheet, MS should be held low to start a R/W. It should be fine if it is held low when booting the IC.
Regards,
Ore