Hi,
I use Evaluation module ADC5140EVM-PDK with PurePath control
Is it possible to change register page in PurePathControl. I can only see Page_0
Regards
Patrice
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I use Evaluation module ADC5140EVM-PDK with PurePath control
Is it possible to change register page in PurePathControl. I can only see Page_0
Regards
Patrice
The Register Map shows page 0 registers which can be read.
Page 2,3,4 are Biquad coefficants. These can be accessed using the programmable Biquad tab