Hi team,
Please help check DIT4192IPWR schematic. Thanks!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Reed,
I will take a look at it tomorrow.
Regards,
Arash
Hello,
Few recommendation on the connection.
For I2S signals it is better to add a 22 to 100Ohm series resistor, I see it only for MCLK.
If the device is intended to be in slave mode the M/S pin needs to be configured accordingly.
For RSTZ, probably having a pullup resistor is a good idea.
Digital input pins such as FMT0/FMT1 need to be tied to high or low based on the need. For digital pins please follow datasheet for specific needs.
Regards,
Arash