Other Parts Discussed in Thread: DRV2700
Hi, I'm Jeon Hyeon Min.
I'm using DRV2700EVM-HV500 for driving piezoelectric actuator.
What I want is 0~158V AC sine wave output for 0~200Hz using DRV2700EVM-HV500.
So I found that I can easily make a sine wave through Wavebuilder in Piezo Control Console.
But I don't know how to make 100Hz sine wave.
The picture below shows the sine wave. I just clicked 'Sine' to make sine wave and Time Between Steps(mS) is 1 for 10Hz.
But, is there any other way to create a 100Hz sine wave other than adding points directly to the text box?
