• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 213 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS3204 TEST mode - Is analog enabled?

David Alexandrou
Intellectual 410 points
Other Parts Discussed in Thread: TAS3204

Hey there everyone.

 

ON the TAS3204 when GPIO1 is held low at startup, the system goes into passthrough mode - my question is does this include the analog paths? ADC and DAC? 

 

Cheers

David.

  • 0
    Intellectual 450 points

    Hello David,

    yes the TAS3204 streams signals from it's analog inputs to it's analog outputs during I/O testconfiguration. The mapping is 1 on 1 so ADC1 streams to DAC1, ADC2 to DAC2 and I really don't know what happens to ADC3, maybe it does nothing or streams to DAC1 or DAC2, never tested this in my application.

     

    Cheers

    Christopher