• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 30 subscribers
  • Views 148 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS2110EVM: How to play music from PC with TAS2110EVM and PPC3

Denis Gallas
Prodigy 10 points
Part Number: TAS2110EVM

Hi to everyone,

I have a TAS2110EVM, a loudspeaker and PPC3 working. I need to play some music from PC but I can't find any document that explains how to. When TAS2110EVM app is open I have the following options: "Device control", "register map", "Direct I2c" and "End system Integration"

In device control page I can properly read VBAT, Sample rate and Temparature, if "Tone Generator" is enabled I can ear the tone every time device is powered up so I think it's just a software setting

Can someone help me please

Thanks in advance

Denis

  • +1
    TI__Guru** 100525 points

    Hi Denis,

    The device should be initialized when you access the "Device control" panel, then you just need to click on the "Power Up" button at the top-right corner. You can use any software to play audio from your PC, just make sure the EVM is selected as your default audio output device.

    If the above doesn't work, click on the IRQ button and then click Read and please share a capture of the items you see there.

    Best regards,
    -Ivan Salazar
    Applications Engineer

  • +1 in reply to Ivan Salazar
    Prodigy 10 points

    Hi Ivan, thanks for help, issue solved.