LM1971: Brown-out protection features?

Kazuki Itoh

Part Number: LM1971

Tool/software:

Hi team,

Does TI test LM1971 for brown-out immunity?
Or, does this device have any brown out protection features?

I didn't find any realted information from the datasheet.
My customer concerns if the serial communication or attenuation operate correctly when temporal brown-out happens.

Best regards,
Kazuki Itoh

2 months ago

+1 Ivan Salazar 1 month ago

TI__Guru* 98965 points

Hi Itoh-san,

LM1971 is specified for a minimum supply voltage of 4.5V, if the supply voltage drops below this level the device would be reset. Note this is quite an old device, only information available is what's already included in the data sheet.

Best regards,
-Ivan Salazar
Applications Engineer

0 Kazuki Itoh 1 month ago in reply to Ivan Salazar

TI__Genius 9545 points

Hi Ivan-san,

My customer is looking for any helpful information to mitigate the risk of brown-out.

After the brown-out event, will the device reset and operate correctly if the serial data is input correctly?

Best regards,

Kazuki Itoh

0 Ivan Salazar 1 month ago in reply to Kazuki Itoh

TI__Guru* 98965 points

Hi Itoh-san,

If the device losses power and then gets it back, it will pretty much treat it as a power-on-reset. So yes, the device will continue to operate after the power transition as long as it keeps receiving the proper serial data input.

Best regards,
-Ivan Salazar
Applications Engineer

Audio

Audio forum

LM1971: Brown-out protection features?