Other Parts Discussed in Thread: TLV320DAC3203
Tool/software:
Dear people,
I am aware, the TLV320DAC3203EVM-K can be used with external signals like one can read on the user's guide:
2.4 Digital Signal Connections
The digital inputs and outputs of the EVM are monitored through P12 and P22. If external signals are connected to the EVM, digital inputs must be connected through J14 and J15 on the USB-MODEVM and the SW2 switch must be changed accordingly (see Section 2.2.1). The connector details are available in Section A.2.
However, I cannot find anything related to the possibility of testing my own board using only the USB-MODEVM Interface board and, whith it, also the GUI.
Before I burn my EVAL by making wrong connections, I would like to hear from you if this is really possible and what should I do for it.
Many thanks in advance, as always!
Sicerely,
Gustavo