Tool/software:
Hi,
Please kindly review the schematic diagram for TPA3116D2.
BTW, please advsie if we can use the single-ended input in the PBTL, thanks.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hi,
Please kindly review the schematic diagram for TPA3116D2.
BTW, please advsie if we can use the single-ended input in the PBTL, thanks.
hi
can you give more clear file like pdf or sth.
the screen short is so blur.
tks
jesse
hi zhang
1.for this is a high power amplifier. not sure how much power be outputed in customer's design.
ferrite bead be used at output seems very rare for this kind of high power device. LC filter should be better.
2.single end input hasn't be verified by us. we do not recommend using like that.
tks
jesse
Hi Jesse,
We use the TPA3116D2 but we can't use the PBTL mode(BTL mode is normal), can you also review the schematic again and check if there are any error for this design, thanks.
hi Zhang
your sch seems so strange. we do not recommend using like that.
if using btl connection, please refer our datasheet.
tks
jesse