Hi
Does anyone know if it's possible to introduce shoot-through protection (dead time) to the PWM outputs of the TAS3308? I'd like to drive Class D output power FET's direct from the TAS3308 PWM outputs if possible.
Gavin
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi
Does anyone know if it's possible to introduce shoot-through protection (dead time) to the PWM outputs of the TAS3308? I'd like to drive Class D output power FET's direct from the TAS3308 PWM outputs if possible.
Gavin
Hi, Gavin,
The outputs are designed to drive one of our power stages, which have the dead-time built in them. There is no provision to control this in the TAS3308.
-d2