• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 633 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5602 setting

Joe Lee
Intellectual 330 points
Other Parts Discussed in Thread: TAS5602

Hi,

I would like to know if it is possible to set TAS5602 as follow:

1 SE output = 2.5W

1 SE output = 2.5W

1 BTL output = 35W

Thanks.

Joe

  • 0
    TI__Guru**** 189399 points

    Hi, Joe,

    It seems like that will work if you use 24V and 8 ohm loads. However, it might not thermally work as too much heat will be centered on the BTL channel. You may need to add some external heat sinking.

    What are you planning to use to generate the PWM input signal to the TAS5602?

    -d2