TAS5611/5613 2xBTL mono from 1 differential input

Antoine Millot

Other Parts Discussed in Thread: TAS5611, TAS5612LA, TAS5622A, TAS5611A

Hello,

I have designed a plateform based on the TAS5611 amplifier chip.

My plateform is done to explore the multiple configurations available from this chip (BTL, PBTL) ; one of our application consists of using this plateform in such a way that we could only have 1 differential mono (L+R) signal inputting the TAS5611 that I want to use in 2xBTL outputting 2 times the same mono signal on 2 dissociated loads.

The question is; is it possible to use the TAS5611, officially in PBTL mode (M3M2M1 = "101" with INPUT_C=1 and INPUT_D=0) inputting my signal using A-B input(differential input) but mapping the output in BTL on 2 loads instead of PBTL (1 load)?

Thank you.

Antoine.

over 10 years ago

0 user5276421 over 10 years ago

TI__Mastermind 37045 points

Hi Antoine,

If you intend to have 2x BTL with 2 input signals, I would recommend TAS5612LA or TAS5622A. These newer power stage has 1N input mode to do just that.

reg,

Paul Chen

Applications Engineer

Dallas TX USA

0 Antoine Millot over 10 years ago in reply to user5276421

Prodigy 20 points

Hi Paul,

Thank you for your reply.

Unfortunately, I am working from an already existing plateform that integrates TAS5611a (analog diff input); I cannot change use another chip.

I do not see any issue to use TAS5611a with 1 differential input and setting TAS5611a in PBTL mode but using it in 2xBTL mode, do not you think?

Is there any limitation coming from the chip itself?

Antoine.

Audio

Audio forum

TAS5611/5613 2xBTL mono from 1 differential input