TPA2025D1 single ended

Ignacio Linares

Other Parts Discussed in Thread: TPA2025D1

I have a customer requesting guidance on using the TPA2025D1 in single ended mode. The datasheet does not appear to provide information on how to connect the inputs in a single-ended configuration.

over 10 years ago

0 Michael Mellitt over 10 years ago

TI__Intellectual 2040 points

Hi Iggy,

I would have you customer take a look at the EVM user's guide: http://www.ti.com/lit/ug/slou310/slou310.pdf

The EVM can be configured for a singled ended input by grounding the IN+ through an input capacitor. I have posted the EVM passage and schematic below.

Hope this helps.

Regards,

Mike

Audio

Audio forum

TPA2025D1 single ended