• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 397 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

May we check if there have Tas5713 PBTL reference circuit?

Chen Bogey8
Mastermind 9990 points
Other Parts Discussed in Thread: TAS5713, TAS5731

Dear Sir

Good days,

May we check if there have Tas5713 PBTL reference circuit?

from TAS5713 DS, we know it can be PBTL, but we can't find reference circuit in it like TAS5731.

May you have some suggestion for us?

                                             Best regards,

                                                            Bogey

  • 0
    TI__Guru**** 189399 points

    Hi, Bogey,

    I don't see a PBTL schematic in the TAS5731 d/s. Can you show me where it is?

    The TAS5731 EVM does have PBTL mode - is that what you're referring to?

    In that case, I think it's configured the same - just check the register settings for where the PWM signals are sent to insure you connect the correct two outputs together.

    And, keep in mind you usually need an inductor with a higher current rating since you only have one.

    -d2