Hi,
Could you please tell us the difference between TAS5611 and TAS5611A?
Best Regards,
Kato
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi, Kato-san,
We will get this information for you.
Can you explain why you need this information? The non-A part is NRND, and should not be used in new designs.
-d2
Hi Kato-san,
The two main improvements were shutting down the oscillator in slave mode to avoid tone issue and decreasing the step size of the DC offset trim to improve DC offset.
reg,
Paul.
Hi Don-san,
Our customer is interested in TAS5611A and TAS5613A.
Since we have a TAS5611PHD2EVM, we would like to lend it.
Although I do not confirm properly, I believe that TAS5611 is implemented on this evm.
So, I asked you this question.
Hi Paul-san,
Thank you for explaining so politely.
I understood.
Best Regards,
Kato
Hi, Kato-san,
It depends on when the EVM was manufactured. If the "A" devices were available during the last rebuild, they would have been used.
-d2
Hi Don-san,
Thank you for your advice.
"TAS5611PHD2EVM 6513861-11 Rev B" is described on the package of evm that I have.
If you can guess in the information mentioned above, could you please tell me which of TAS5611 and TAS5611A is implemented?
Best Regards,
Kato