DIT4096 Line Driver

Sadanori Kato

Other Parts Discussed in Thread: DIT4096, DRV134, SN75176B

Hi,

Do you have any products with same function only like the internal line driver of DIT4096?
Could you please tell me if you have?

Best Regards,
Kato

over 10 years ago

0 Don Dapkus over 10 years ago

TI__Guru**** 189399 points

Hi, Kato-san,

You mean something like DRV134?

-d2

0 Sadanori Kato over 10 years ago in reply to Don Dapkus

Guru 36510 points

Hi Don-san,

Yes, you are correct.
Although I also found DRV134, this device have to be applied +/-4.5V ~ +/-18V as the power supply voltage.
So, could you please tell me the device that is able to be applied 5V like DIT4096?

Best Regards,
Kato

0 Pavel Ruzicka over 10 years ago

Expert 1720 points

Hi,

For S/PDIF output I use RS485 bus transceiver SN75176B. It has 5V TTL input and 0/5V differential output. This chip can be used also for input. For correct impedance you must add serial resistor (110R for balanced S/PDIF) or voltage divider for unbalanced S/PDIF output. I succesfully used this circuit in my USB DAC:

http://www.pavouk.org/hw/modulardac/en_pcm2706i2s.html

0 Sadanori Kato over 10 years ago in reply to Pavel Ruzicka

Guru 36510 points

Hi Pavel-san,

Thank you for your information.

Hi Don-san,

Do you recommend that we use SN75176B that Pavel-san suggests instead of DIT4096 as the line driver for AES-3 encoder?

Best Regards,
Kato

Audio

Audio forum

DIT4096 Line Driver