Document for TAS3308 is not finished?

Vladimir Timohin

Other Parts Discussed in Thread: TAS3308

Hello, dear TI !

I`am sorry for disturbing... but i can`t find the complete information for TAS3308. I need the I2C commands to configure TAS3308 with external MCU. Where i can find them ?

With best regards, Vladimir.

over 14 years ago

0 Somnath Mukherjee over 14 years ago

TI__Intellectual 2460 points

Hi,
You can find all the programmable registers along with configuration values of the TAS3308 device in the manual itself.
You need to send the device address followed by register address and the value you want to program via I2C.

Let me know if you are looking for something more specific!

-Somnath

0 Vladimir Timohin over 14 years ago in reply to Somnath Mukherjee

Prodigy 210 points

Thank`s a lot !

And another question : TAS3308 are compatible with TAS3218 , in I2C commands or not?

P.S. Where can i find initialization proccess TAS3308? (Maybe exist official document).

With best regards, Vladimir.

Audio

Audio forum

Document for TAS3308 is not finished?