TAS5719 How to Dump Register Configuration

Sadanori Kato

Other Parts Discussed in Thread: TAS5719

Hi,

Could you please tell us how to dump the register configuration as a text file and download it to TAS5719 via I2C interface using the gui ?
Currently, it is extremely inefficient since it is necessary to change the register configuration every time using the gui.

Best regards,
Kato

over 8 years ago

0 Diego Melendez over 8 years ago

TI__Guru 57800 points

Hi, Kato-san,

I will take a look to your question and get back to you as soon as possible.

Best Regards,

-Diego Meléndez López
Audio Applications Engineer

0 Sadanori Kato over 8 years ago in reply to Diego Melendez

Guru 36510 points

Hi Diego-san,

Thank you for your quick response.
I am looking forward to hearing from you.

Best regards,
Kato

0 Diego Melendez over 8 years ago in reply to Sadanori Kato

TI__Guru 57800 points

Hi, Kato-san,

You can save the current GUI configuration into a script text file via Write I2C Init File Command in Target section of the GUI. Then, you can load the previously saved fle via I2C Memory tool under Tools menu. You may also use the I2C Logging function that can be fount in Tools menu. This feature will track all the I2C register updates made with the controls in the GUI and save them in a .cfg file located in the Software install directory, typically C:\Program Files\Texas Instruments Inc\TAS57XX GDE\ ProcessFlows\TAS57XX\diagnostics.cfg.

Best Regards,

-Diego Meléndez López
Audio Applications Engineer

0 Sadanori Kato over 8 years ago in reply to Diego Melendez

Guru 36510 points

Hi Diego-san,

Thank you for your information.
I understood and will try to check it.

Best regards,
Kato

Audio

Audio forum

TAS5719 How to Dump Register Configuration