• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 405 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5722L: Asking for the TAS5722L I2S input mixer setting

SHH
Mastermind 30776 points
Part Number: TAS5722L

Hi team,
Customer would like to choose stereo amp 10~20Watt with IOVDD 1.8V due to the main chip I2S source is 1.8V level.

1. If customer use two TAS5722L for stereo application, could customer set the TAS5722L mixer function? One TAS5722 for right channel, another TAS5722 for left channel?
2. Do we have TAS5722 GUI recently?
3. Do we have stereo 1.8V I2S interface solution?

Thanks,
SHH

  • 0
    TI__Guru 52115 points
    See my comments:
    1. If customer use two TAS5722L for stereo application, could customer set the TAS5722L mixer function? One TAS5722 for right channel, another TAS5722 for left channel?
    Andy: As far as I know, TAS5722L doesn't have any mixer, but it is OK to have one TAS5722L output the right channel and another output the left channel.

    2. Do we have TAS5722 GUI recently?
    Andy : No. TAS5722 doesn't have a GUI yet since it has very few registers.

    3. Do we have stereo 1.8V I2S interface solution?
    Andy: Not yet.