• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 382 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS6422Q1EVM: Pdf failure for high voltage use

Tamas Tako
Prodigy 130 points
Part Number: TAS6422Q1EVM

Dear All,

The PDF has a bug where it describes how to use the EVM board with larger than 18V

Instead of J2 they should state J12.

So the PDF should state correctly:

3. "Power Supply Unit (PSU)  up to26.4V, > 6A capable, if J12(!!!!) is removed and 12V is provided (to Vbatt pin of J12!!!!!). If J12 is in, limit the input voltage to 18V."

Dear TI team, please edit the PDF!

Thanks,

Tamas