Hello,
received today the PCM5242RHBEVM and immediately some questions:
What is the difference between Purepath Studio and Purepath Console and what do I need for Windows and the board?
Then I connected the board to a Win10 Comuter via USB. Seems to work, but initially only 16 bit / 48 kHz are possible. Is there a suitable driver for Highres Audio?
Thank you for your support!
Best regards from Berlin, Hans-Juergen Esch, Esch Projekt
Hi Hans-Juergen,
PurePath Console should be your primary control software for the EVM. It allows you configure the inputs to the PCM5242 as well as select different HybridFlows to experiment. The HybridFlows are predefined DSP programs for the PCM5242. These have been created by TI in an effort to leverage both the RAM and ROM functionality of the miniDSP in the PCM5242.
This document describes the hybrid flows. If one of the hybrid flows does not satisfy your requirements, you can use PurePath Studio to develop an new flow. PPS requires some expertise and knowledge of the miniDSP functionality as well. The PPC software should allow you change the sample rates as well.
Please let me know if this answers your questions.
Thanks!
Paul
