Hello
My customer intend to use 2.1ch for TAS5755M .
I had tested TAS5755MEVM by myself.
SSTIMER pin is as default ( 2.2nF is between SS timer and gnd)
In case 0x1A register is 1Ah ( SSTIMER enabled), POP is seen, 0x1A is 88h, no pop.seen.
( see attached )
Is my test correct?
SSTIMER function should be disabled in case 2.1ch? ( Is customer should so, pop in case 2.1ch is same level
as 2ch BTL?)
Please advise
Best Regards
TAS5755_SE_POP_EVM testing.pptx