Other Parts Discussed in Thread: PCM4201, PCM4201EVM
Hi Team,
Customer uses DIT4096 and has some issues.
Thus, we used the PCM4201 EVM's DIT4096 for verification.
schematic www.ti.com/.../sbau108
I jumped the RN4 and RN3 resistor and jump the MCLK/SCLK/SYNC/SDATA from PCM4201 J3 to DIT4096.
Here are the 24bit left-justified audio source that send from audio precision.
MCLK
SCLK
SYNC
SYNC ZOOM In
SDATA
Here are the Audio precision setting and unbalanced AES measurement result.
the resulted is not decode well.
Can you please duplicate this case and advise how to set the audio precision to get the correctly decode result?
BR,
SHH