TPA2018D1YZFEVM: TPA2018D1 Interface I2C Problem

Ahmet Emre

Other Parts Discussed in Thread: TPA2018D1

art Number: TPA2018D1YZFEVM

Hello,

I haveTPA2018D1YZF Evaluation Module.

When I downloaded TPA2018D1 Interface i took "I2C Failure" error. Drivers looks okay. I upload last NI VISA Drivers. What should i do with that..

over 5 years ago

0 Ivan Salazar over 5 years ago

TI__Guru** 100575 points

Hi Ahmet,

Have you tried on a Win7 system?
Perhaps the GUI is not supported on win10 or 64bit systems as this was developed some time ago.

Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio and Actuators

0 Ivan Salazar over 5 years ago in reply to Ivan Salazar

TI__Guru** 100575 points

Ahmet,

I'm following up on this thread.
Have you tried on win7 system as suggested above, were you able to evaluate the device?

Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators

Audio

Audio forum

TPA2018D1YZFEVM: TPA2018D1 Interface I2C Problem