This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello Kazuto,
The TLV320ADC3100 and ADC3101 have very tolerant power up/down sequences. The reset must be held low until the supplies are stable.
The recommended procedure would be all supplies at once, OR
1- IOVDD
2- DVDD
3-AVDD
The only issues with not following the above sequence is there will be current leakage. but as long as reset is held low until all supplies are stable, the device will not have any functional problems.
best regards,
-Steve Wilson
Hello
This is Nakaegagwa from Onkyo in Japan.
I have additional quesitons.
Please inform me I2C start timing from the reset release on TLV320ADC3100?
And regarding toTLV320DAC3203, please inform me power up & power down sequence for power supply pins (DVDD/IOVDD/AVDD) , I2C start timing form the reset release too.
Thank you & Best Regards,
Nakaegawa
Kazuto,
I have responded to the linked thread.
best regards,
-Steve Wilson