PCM5141: PCM5141 sdout compensation in purepath studio

Mason Liu

Part Number: PCM5141

Hi,

As shown in the datasheet, My question is: How to compensate the 0.5db in the purepath studio? Could you share an example?

Thanks.

Best regards

Mason Liu

0 Paul_Frost over 4 years ago

Hi Mason,

You will need to implement a few bi-quads in the your process flow to apply a 0.5dB gain. Here is an example of the process flow:

Here is a biquad setting I used, but you could do a few different methods for a similar result.

Thanks,

Paul

Audio forum