PCM1862-Q1: PCM1862-Q1

user5872335

Prodigy 50 points

Part Number: PCM1862-Q1
Other Parts Discussed in Thread: PCM1862

1. If PCM1862 uses TDM cascade, does it support 12-channel microphone input?

2.If PCM1862 uses TDM cascade, does it support 12-channel microphone input?

over 4 years ago

0 Steve-Wilson over 4 years ago

TI__Mastermind 30080 points

User,

The PCM1862 does not have TDM Cascade, or Daisy chain mode, the PCM1862 uses a standard TDM configuration.

best regards,

-Steve Wilson

0 user5872335 over 4 years ago in reply to Steve-Wilson

Prodigy 50 points

0 user5872335 over 4 years ago in reply to user5872335

Prodigy 50 points

0 user5872335 over 4 years ago in reply to user5872335

Prodigy 50 points

0 user5872335 over 4 years ago in reply to user5872335

Prodigy 50 points

1.Thank you for your support ！！！I have another question，When two PCM186X-Q are cascaded, does TDM support transmission of 16bit x16 channels and sampling frequency of 96khz。

2.PCM1862-Q/PCM1863-Q does not have TDM Cascade？ PCM1864-Q/PCM1865-Q does have TDM Cascade？

0 Steve-Wilson over 4 years ago in reply to user5872335

TI__Mastermind 30080 points

Hello User,

To clarify, the images you posted above are for standard TDM mode. This is not the same as TDM cascade.

To be clear, TDM and TDM cascade are different things.

The PCM186x devices do not support cascade. The PCM186x devices do support TDM (parallel) (it would have to as there are 4 channels).

I assumed you were asking about Cascade/daisy chain mode, because it is quite clear that all of the PCM186x devices support TDM. It says this on the first page of the datasheet.

The PCM186x supports 96k operation, and can handle a bclk to LRCLK ratio of 256, but note that you would need 4 of the 4 channel PCM 186x devices to do this, and this would require an I2C mux as there are only 2 possible I2C addresses for the PCM186x.

best regards,

-Steve Wilson

Audio

Audio forum

PCM1862-Q1: PCM1862-Q1