TAS5805M: Process flow commonality with TAS5805M, TAS5806M and TAS5806MD

Kazuto Tatsumi

Part Number: TAS5805M
Other Parts Discussed in Thread: TAS5806MD, TAS5806M,Hi Team,

Could you help me regarding the question about the application report below?

TAS5805M, TAS5806M and TAS5806MD Process Flows
www.tij.co.jp/.../sloa263
(1) Does the title of the report "TAS5805M, TAS5806M and TAS5806MD Process Flows" means that three of P/Ns have the same process flow inside?

(2) Does "Process Flow 1/2/3" means that each process flows can be chosen on the PPC3 GUI?

Best Regards,
Kazuto

over 4 years ago

0 Luis Fernandes de Pina over 4 years ago

TI__Genius 14420 points

Hello Tatsumi-san,

That is correct they have the same process flows. Process flow 1 is the 3-band DRC option you see in PPC3 when you open Tuning & Audio Processing, Process flow 2 is the 3-band DRC & FIR option you see in PPC3, and Process flow 3 is the 2.1 option you see in PPC3 software.

Best Regards,

Luis

0 Kazuto Tatsumi over 4 years ago in reply to Luis Fernandes de Pina

TI__Intellectual 2820 points

Hi Luis, I understand. Thanks!

Audio

Audio forum

TAS5805M: Process flow commonality with TAS5805M, TAS5806M and TAS5806MD