• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 136 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PCM3008: Independent use of input / output channels

Kazuki Itoh
Genius 9605 points
Part Number: PCM3008

Hello team,

Is it OK to use PCM3008 with L and R channels of each input and output separately?

Regards,

Itoh

  • 0
    TI__Guru 62715 points

    Hello,

    Yes, there are separate DIN and DOUT pins on this device allowing the user to send data to the DACs and receive data from the ADC separately.  The two interfaces will share a common BCLK and WCLK.  This is shown in the main block diagram and the DIN input data is sent to the L and R DACs and the DOUT data is from the L and R ADC channels.