Hello team,
Could you please advise how to suppress the audible noise by the output filter setting?
Please find the waveform from the internal link here.
Best regards,
Itoh
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Itoh,
please follow or check the recommend setting from the data sheet. the typical value of the cap is 1nF.
Br,
Wenbin
from
Hi, Itoh-san,
The reference that Wenbin mentioned should be this one below.
https://www.ti.com/lit/ds/symlink/tas2110.pdf#page=89
Please let us know if you have further questions or comments.
Best regards,
Luis Fernando Rodríguez S.