The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] TLV320AIC3254EVM-K: Issue with GUI - not displaying anything - stuck at blank screen

Part Number: TLV320AIC3254EVM-K

My customer is having issues getting the Eval Board started. It is connected via USB (D2 lights up). But when the GUI is launched nothing is displayed and here is an image of what we're getting:

I changed the settings of SW3 by accident (instead of SW2) and cannot remember the default setting anymore nor find it in any documentation.
Can we get back to the default settings of SW3? Anything else that I might be doing wrong?

Thanks,
Nick