The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS2559: ASI clock error detection

Part Number: TAS2559


Can you please describe what type of clock errors the ASI clock error block detects ? Especially when the codec is running in slave mode.

E.g detection of:
- deviation on LRCLK relative to MCLK
- framing error (BCLK count compared to length of LRCLK; etc)

Best regards,
Frank Rolsted Jensen