Other Parts Discussed in Thread: TAS3251
Hi
We are working on a project with TAS5720.
We use mediatech MCU to send i2s to TAS5720.
Below is our design diagram. Please note we have had 1 design for this IC series and it is working properly with Samsung ARTIK Smart IoT Platform.
And here is the configuration of the registers we use.
TAS5720 config value
0x01 -> 0xfc
0x02 -> 0x04
0x03 -> 0x90
0x04 -> 0xf4
0x06 -> 0x59
0x08 -> 0x08
0x10 -> 0xff
0x11 -> 0xfc
Can you help me check them for any mistakes in the design as well as the i2c configuration or any solution so i can find the error location.
We have used TAS3251 for mediatech MCU in previous projects and they work properly. I don't think the problem is with the I2S communication.
Please respond as soon as possible. We don't have much time left for this project right now.
Thanks,