This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

TAS5756MDCAEVM: Using with EVAL motherboard and PurePaths 2

Prodigy 90 points

Replies: 3

Views: 480

Part Number: TAS5756MDCAEVM

Good day gentlemen.

Using A TAS5756 EVM with PurePaths 2. 

Wanted to know if there was a quicker way to switch between the HybridFlow EQ settings for purposes of doing A/B comparisons.

I can quickly change speakers as needed, but switching between filters takes a long time.

  • Hello Orlando! I am not aware of a faster way to do this. Are you trying to set up a demo?

    Hello Andy! Do you have any other suggestions? Thanks, Jeff
  • Hi Orlando,

    Just as Jeff mentioned,  I don't see an easy way to switch between two different tuning settings in PPC2.

    I would suggest you take a look at our TAS5782MEVM. TAS5782M is p2p to TAS5756M and offers more advanced flows than TAS5756M.  More importantly, TAS5728M is using PPC3 GUI and you can take snapshots whenever you want and therefore it is quite easy to switch among different configurations.  

    Andy

  • In reply to Jeff Kohnle:

    Yes trying to compare difference speakers and EQ  profiles.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.