• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 227 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPA6130A2: Frequency vs. Output dBV

Jerry Chu
Genius 4915 points
Part Number: TPA6130A2

Hi Expert,

Do you have TPA6130A2 freq. vs. output dBV curve? (3.6V, 16ohm, input Cap 0.47uF,) Does the range within +/-0.1dB? Thanks!

  • 0
    TI__Guru* 95385 points
    Hi Jerry,

    You want to know the frequency response of the device? What is the signal you want to drive with TPA6130A2?
    The frequency response is most likely flat across the audible range. There is a previous post with some additional information: e2e.ti.com/.../1406485

    Best regards,
    -Ivan Salazar
    Applications Engineer - Low Power Audio & Actuators