• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 270 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

PUREPATHCONSOLE: Fatal Error in Installe

TAS5756MDCAEVM: Recently, a project used TI device TAS5756M, and a set of TAS5756MDCAEVM and control motherboard. During the test, the firmware of the test program MSP430F2132 was accidentally written and overwritten. Could you please provide the firmware

fengkun shu
Prodigy 10 points
Part Number: TAS5756MDCAEVM
Other Parts Discussed in Thread: TAS5756M, MSP430F2132, , PUREPATH-CMBEVM, PUREPATHCONSOLE

Recently, a project used TI device TAS5756M, and a set of TAS5756MDCAEVM and control motherboard. During the test, the firmware of the test program MSP430F2132 was accidentally written and overwritten. Could you please provide the firmware of the test program MSP430F2132? thank you

  • 0
    TI__Expert 6295 points
    hi,
    TAS5756 is combined with a PurePath™ Console Mother Board (PurePath-CMBEVM – must be ordered separately) and PurePath™ Console GUI (PurePathConsole – must be ordered separately) you have a complete audio evaluation system. we dont support MSP430 firmware code.
  • 0
    TI__Genius 9995 points
    Hi Customer,

    Please go to MCU form to ask for the firmware of the test program. On audio amplifier's side, what we can provide is the registers configuration of TAS5756, which is is integrated in the programme you are secking. For this point, I think you can refer to Linda's suggestion to ask for a complete audio evalution system.
    But if you are firmware engineer, please go to MCU forum to ask for the code.

    Regards,
    Alix Wan.