I use TPL5010DDCR watchdog, as shown in the schematic diagram below.
The delay time measured by oscilloscope is between 10-16 seconds.
Is this a normal phenomenon or a design problem?Will the delay be less than 8 seconds?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I use TPL5010DDCR watchdog, as shown in the schematic diagram below.
The delay time measured by oscilloscope is between 10-16 seconds.
Is this a normal phenomenon or a design problem?Will the delay be less than 8 seconds?